Transportation Administration System
Snoezelen Pillows for Dementia
Begeleiders voor gehandicapten
Laat uw hond het jaarlijkse vuurwerk overwinnen
Betuweroute en Kunst
Hey Vos! Je eigen naam@vos.net emailadres?
Kunst in huis? Nicole Karrèr maakt echt bijzonder mooie dingen
Kunst in huis? Netty Franssen maakt ook bijzonder mooie dingen1 PRODUCT
The POLYCENTER Software Installation utility installs or removes layered software products, registers products, sets up configuration choices offered by products, and extracts a product's release notes. Format PRODUCT [subcommand product-name [/qualifiers]] 2 Parameters subcommand Specifies an operation you want the POLYCENTER Software Installation utility to perform. product-name Specifies the name of the product to which you want to apply the activity. Some subcommands do not require this parameter. You can use the asterisk (*) and the percent sign (%) wildcard characters for all or part of the product-name. You can specify a list of products separated by commas (,). 2 Usage_Summary To use the POLYCENTER Software Installation utility from the DCL prompt, enter the PRODUCT command, a subcommand, a product name, and optional qualifiers. For example: $ PRODUCT INSTALL COBOL/VERSION=5.3 You can use the PRODUCT commands in command procedure files. 2 CONFIGURE Creates a product configuration file (PCF) for one or more products. Optionally uses the values in an existing PCF to create the new PCF. Format PRODUCT CONFIGURE product-name[,...] [/qualifiers] 3 Parameter product-name Names the product, or list of products, for which product configuration files will be generated. 3 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /CONFIGURATION /CONFIGURATION=(keyword[,...]) Specifies how the configuration choices will be supplied. Keywords are: CURRENT This is the default. It uses values from the product database, which contains the current values recorded from the last time the product was installed or reconfigured. PRODUCER Uses values specified by the software manufacturer for this version of the product. INPUT=pcf- Uses values from the specified product name configuration file. OUTPUT=pcf- Writes configuration choices to the specified name product configuration file. If no file name is supplied, creates a file named DEFAULT.PCSI$CONFIGURATION in the current default directory. The keywords CURRENT, PRODUCER, and INPUT are mutually exclusive. Each of these, however, can be used with the keyword OUTPUT. If you specify only one keyword, you can omit the parentheses. /HELP /HELP /NOHELP (default) Controls whether detailed explanations of product options and informational text are displayed. The first time you install a product, these explanations can help you decide which options to select. When you perform subsequent installations or upgrades, you might choose the brief explanations to save time. When /NOHELP is selected, you can request a detailed explanation about a question by performing one of the following actions at the prompt: o Press the Help key or PF2 key o Type ? and press the Return key /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on software products that are produced by the specified manufacturer. By default, the operation is performed for all producers. /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. These logical names do not affect the /DESTINATION qualifier. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location defined by the logical name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. 3 Example $ PRODUCT CONFIGURE EDITOR - _$ /CONFIGURATION=(INPUT=EDITOR_REV1.PCF,OUTPUT=EDITOR_REV2.PCF) The command in this example reads an existing PCF named EDITOR_ REV1.PCF for a product named EDITOR and then saves your changes in EDITOR_REV2.PCF. 2 COPY Manipulates a product distribution kit by either creating a sequential copy from a reference copy, creating a reference copy from a sequential copy, or creating a copy without changing the format. You must supply the /DESTINATION qualifier. Format PRODUCT COPY product-name/DESTINATION=device-name:[directory-name] [/qualifiers] 3 Parameter product-name Names the product, or list of products, to copy. 3 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /DESTINATION /DESTINATION=device-name:[directory-name] Specifies a location where the utility will place a copy of a sequential kit; for a reference kit, specifies the top-level directory location where the utility will place files. If the device name is not provided, it defaults to the user's default device. If the directory name is omitted, it defaults to the user's default directory. The PRODUCT COPY operation ignores the PCSI$DESTINATION logical name whether or not you use the /DESTINATION qualifier. /FORMAT /FORMAT=keyword Specifies the output format of the product kit. Keywords are: REFERENCE Reference format in which product files are placed in a directory tree. SEQUENTIAL Sequential format in which product files are placed in full-product-name.PCSI, a container file. The default is to preserve the format of the product kit. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /OWNER_UIC /OWNER_UIC=uic Specifies the owner user identification code (UIC) for files created during a copy operation. By default, the user executing the operation owns the software product files. For example, if you are logged in to your own account, you can use this qualifier during a copy operation to assign ownership of the product files to SYSTEM rather than to your own account. Specify the UIC in alphanumeric format (in the form [name]) or in octal group-member format (in the form [g,m]). UIC formats are described in the OpenVMS User's Manual. /PRODUCER /PRODUCER=producer-name Performs the operation only on software products that are produced by the specified manufacturer. By default, the operation is performed for all producers. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location defined by the logical name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. 3 Example $ PRODUCT COPY ABC/SOURCE=[SHERMAN.ABC] - _$ /DESTINATION=[KITS]/FORMAT=SEQUENTIAL The command in this example converts product kit ABC, located in the [SHERMAN.ABC] directory on the user's default device, to a sequential copy in the [KITS] directory on the user's default device. 2 EXTRACT 3 FILE Retrieves a user-specified file or files from a sequentially formatted software product kit. A file type of .PCSI denotes a sequential kit. The original name of the file is preserved when it is extracted. Format PRODUCT EXTRACT FILE product-name[,...] [/qualifiers] 4 Parameter product-name Names the product, or list of products, from whose kits the selected file or files are to be retrieved. This parameter is required. 4 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /DESTINATION /DESTINATION=device-name:[directory-name] Specifies the location where the utility is to place all the files that the user indicates are to be retrieved. If the device name is not provided, the default is the user's default device. If the directory name is omitted, or the /DESTINATION= qualifier is not specified, the default is the user's default directory. The EXTRACT FILE operation ignores the PCSI$DESTINATION logical name whether or not you use the /DESTINATION qualifier. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs an operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on software products that are produced by the specified producers. By default, the operation is performed for all producers. /SELECT /SELECT=filename[,...] Specifies the name of a file, or a list of files, to be extracted from the specified sequential kit. You can use the asterisk (*) and the percent sign (%) wildcard characters for all or part of the file name. The file name can contain a directory specification that includes an ellipsis (...). If you omit this qualifier, all files will be extract from the specified kit or kits. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location that the logical name PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs an operation only on the specified version of the software products. By default, the operation is performed on all versions. 4 Example $ PRODUCT EXTRACT FILE TEST /SELECT=TEST.EXE /SOURCE=[AL] In this example, the POLYCENTER Software Installation utility extracts the file TEST.EXE from the sequential kit of the product TEST that is in the [AL] directory on the user's default disk. The extracted file TEST.EXE is placed in the user's current default directory. 3 PDF Retrieves the product description file (PDF) from a sequentially formatted software product kit. A file type of .PCSI denotes a sequential kit. The file type of the extracted PDF file is .PCSI$DESCRIPTION. Format PRODUCT EXTRACT PDF product-name[,...] [/qualifiers] 4 Parameter product-name Names the product, or list of products, whose PDF file is to be retrieved from the kit. 4 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /DESTINATION /DESTINATION=device-name:[directory-name] Specifies the location where the utility is to place the extracted product description file (PDF). If the device name is not provided, the default is the user's default device. If the directory name is omitted, or the /DESTINATION= qualifier is not specified, the default is the user's default directory. The EXTRACT PDF operation ignores the PCSI$DESTINATION logical name whether or not you use the /DESTINATION qualifier. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs an operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on software products that are produced by the specified producers. By default, the operation is performed for all producers. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location that the logical name PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs an operation only on the specified version of the software products. By default, the operation is performed on all versions. 4 Example $ PRODUCT EXTRACT PDF TEST /SOURCE=[AL] In this example, the POLYCENTER Software Installation utility extracts the product description file (PDF) from the sequential kit of the product TEST that is in the [AL] directory on the user's default disk and places it in the user's current default directory. 3 PTF Retrieves the product text file (PTF) from a sequentially formatted software product kit. A file type of .PCSI denotes a sequential kit. The PTF is stored in a product kit as a text library file. The file type of the extracted PTF file is .PCSI$TLB. In addition, a text file version of this text library file is created with a file type of .PCSI$TEXT. Format PRODUCT EXTRACT PTF product-name[,...] [/qualifiers] 4 Parameter product-name Names the product, or list of products, whose PTF file is to be retrieved from the kit. 4 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /DESTINATION /DESTINATION=device-name:[directory-name] Specifies the location where the utility is to place the extracted product text file (PTF). If the device name is not provided, the default is the user's default device. If the directory name is omitted, or the /DESTINATION= qualifier is not specified, the default is the user's default directory. The EXTRACT PTF operation ignores the PCSI$DESTINATION logical name whether or not you use the /DESTINATION qualifier. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs an operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location that the logical name PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs an operation only on the specified version of the software products. By default, the operation is performed on all versions. 4 Example $ PRODUCT EXTRACT PTF TEST /SOURCE=[AL] In this example, the POLYCENTER Software Installation utility extracts the product text file (PTF) from the sequential kit of the product TEST that is in the [AL] directory on the user's default disk and places two files in the user's current default directory: the extracted text library file (.PCSI$TLB) and a text file (.PCSI$TEXT) created from the library. 3 RELEASE_NOTES Retrieves the release notes for the selected product or group of products. If no output file name is given, the release notes are written to a file named DEFAULT.PCSI$RELEASE_NOTES in the user's default directory. Format PRODUCT EXTRACT RELEASE_NOTES product-name[,...] [/qualifiers] 4 Parameter product-name Names the product, or list of products, from which to extract release notes. 4 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /FILE /FILE=filespec Specifies the name of the output file that will contain the release notes. If no file name is given, the release notes are written to a file named DEFAULT.PCSI$RELEASE_NOTES in the current directory. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location that the logical name PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. /WORK /WORK=device:[directory] Specifies the name of the device and directory acting as a temporary work area. By default, temporary files are created in subdirectories of the user's login directory. 4 Example $ PRODUCT EXTRACT RELEASE_NOTES XYZ/VERSION=2.3/FILE=[RN]XYZ.TXT The command in this example places the release notes for Version 2.3 of the product XYZ in a file named [RN]XYZ.TXT on your current default device. 2 FIND Displays the names of software product kits located in the specified directory. Format PRODUCT FIND product-name[,...] [/qualifiers] 3 Parameter product-name Names the product, or list of products to find. 3 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location defined by the logical name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. 3 Example $ PRODUCT FIND TEST*/BASE_SYSTEM=VAXVMS The command in this example searches for all software product kits located in the user's default directory and displays the names of all versions of products whose names begin with "TEST" and are intended to be installed on OpenVMS VAX. 2 INSTALL Installs one or more software products on your system and updates the product database. Format PRODUCT INSTALL product-name[,...] [/qualifiers] 3 Parameter product-name Names the product, or list of products, to install. 3 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /CONFIGURATION /CONFIGURATION=(keyword[,...]) Specifies how the configuration choices will be supplied. Keywords are: CURRENT This is the default. It uses values from the product database, which has the current values recorded from the last time the product was installed or reconfigured. PRODUCER Uses values specified by the software manufacturer for this version of the product. INPUT=pcf- Uses values from the specified product name configuration file. OUTPUT=pcf- Writes configuration choices to the specified name product configuration file. If no file name is supplied, creates a file named DEFAULT.PCSI$CONFIGURATION. The keywords CURRENT, PRODUCER, and INPUT are mutually exclusive. Each of these, however, can be used with the keyword OUTPUT. If you specify only one keyword, you can omit the parentheses. /DESTINATION /DESTINATION=device-name:[directory-name] Specifies a location where the utility will install software product files. If you omit the device name, the utility uses your current default device. If you omit the directory name, the utility uses the [VMS$COMMON] directory as the default directory. If you do not use this qualifier to specify a destination, the utility installs the software in the location defined by logical name PCSI$DESTINATION. If this logical name is not defined, the utility installs the software in SYS$SYSDEVICE:[VMS$COMMON], the top-level directory for software product files. /HELP /HELP /NOHELP (default) Controls whether detailed explanations of product options and informational text are displayed. The first time you install a product, these explanations can help you decide which options to select. When you perform subsequent installations or upgrades, you might choose the brief explanations to save time. When /NOHELP is selected, you can request a detailed explanation about a question by performing one of the following actions at the prompt: o Press the Help key or PF2 key o Type ? and press the Return key /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /REMARK /REMARK=string Records a comment in the product database about the task you are performing. The SHOW HISTORY command displays the recorded comments. For each product, the POLYCENTER Software Installation utility stores a chronological list of tasks you perform and the associated remarks. The default behavior is that no remark is recorded. /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. These logical names do not affect the /DESTINATION qualifier. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location defined by the logical name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /TEST /TEST (default) /NOTEST Requests that the POLYCENTER Software Installation utility run the installation verification procedure (IVP) for the product. /TRACE /TRACE /NOTRACE (default) Displays all DCL commands that the POLYCENTER Software Installation utility may execute while performing the operation. Any output generated by these commands is also displayed. This qualifier is a debugging aid to trace the execution of DCL commands and command procedures executed in a subprocess. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. /WORK /WORK=device:[directory] Specifies the name of the device and directory acting as a temporary work area. By default, temporary files are created in subdirectories of the user's login directory. 3 Example $ PRODUCT INSTALL POSIX/VERSION=3.0/CONFIGURATION=OUTPUT=POSIX.PCF The command in this example installs POSIX Version 3.0 and creates a product configuration file. 2 LIST Lists the names of the files contained in a sequentially formatted software product kit. A file type of .PCSI denotes a sequential kit. All files in a kit are listed unless you use the /SELECT qualifier to specify a subset of the files. Format PRODUCT LIST product-name[,...] [/qualifiers] 3 Parameter product-name Names the product, or list of products, whose kit contents are to be listed. This parameter is required. 3 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs an operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /SELECT /SELECT=filename[,...] Specifies the name of a file, or a list of files; these files are in the specified sequential kit. You can use the asterisk (*) and the percent sign (%) wildcard characters for all or part of the file name. The file name can contain a directory specification that includes an ellipsis (...). /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location that the logical name PCSI$SOURCE defines. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs an operation only on the specified version of the software products. By default, the operation is performed on all versions. 3 Example $ PRODUCT LIST TEST /SELECT=TEST.*/SOURCE=[AL] In this example, the POLYCENTER Software Installation utility lists all the files that match the selection criteria TEST.* from the sequential kit of the product TEST that is in the [AL] directory on the user's default disk. 2 PACKAGE Creates a software product kit. This operation uses a product description file (PDF) and an optional product text file (PTF) to produce a kit that contains the images and other files that make up the product. During a package operation, the POLYCENTER Software Installation utility reformats the input PDF file to produce a new output PDF. Comments are removed from the output PDF and information, such as the size of each file, is added. The input PTF is transformed into an output PTF in text library format. The PRODUCT PACKAGE command requires the /SOURCE, /DESTINATION, and /MATERIAL qualifiers. Format PRODUCT PACKAGE product-name[,...] [/qualifiers] /SOURCE=file-specification /DESTINATION=device-name:[directory-name] /MATERIAL=(path-name[,...]) 3 Parameter product-name Names the product to be packaged. 3 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /COPY /COPY(default) /NOCOPY Specifies whether you want the product material files and associated directories included in the product kit. The /NOCOPY qualifier can save file processing time when you are debugging a PDF and do not need to produce a complete product kit. The use of /NOCOPY with /FORMAT=SEQUENTIAL is not supported and produces undefined results. /DESTINATION /DESTINATION=device-name:[directory-name] If /FORMAT=SEQUENTIAL is specified, /DESTINATION specifies the directory where the utility creates the sequential kit. A sequential kit is a container file that includes the PDF, PTF, and all the images and other material that make up the product. The file type of the sequential kit file is .PCSI. If /FORMAT=REFERENCE is specifed (or defaulted), /DESTINATION specifies the directory where the utility creates the output PDF and optional PTF. The file types of the PDF and PTF files are .PCSI$DESCRIPTION and .PCSI$TLB, respectively. The images and other materials that make up the product are placed in a directory tree under this directory. If the device name is not provided, it defaults to the user's default device. If the directory name is omitted, it defaults to the user's default directory. The PRODUCT PACKAGE operation ignores the PCSI$DESTINATION logical name whether or not you use the /DESTINATION qualifier. /FORMAT /FORMAT=keyword Specifies the output format of the product kit. Keywords are: REFERENCE Reference format in which product files are placed in a directory tree. SEQUENTIAL Sequential format in which product files are placed in full-product-name.PCSI, a container file. The default is /FORMAT=REFERENCE. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /MATERIAL /MATERIAL=path-name /MATERIAL=(path-name[,...]) Specifies one or more locations in which the utility can search for product material files to include in the software product kit. Material files represent the output of the producer's software engineering process, that is, all files that make up the software product excluding the PDF and PTF. The format for path-name is: device-name:[directory-name] You can specify path-name as: A specific directory Only one directory is searched. A root directory A period (.) following the directory name denotes a root directory specification. For example, TEST$:[ABC.FT2.] limits the search path to subdirectories of [ABC.FT2]. A wildcard directory The directory name includes one or more of the wildcard characters asterisk (*), percent sign (%), or ellipsis (...). All directories that satisfy the wildcard specification are searched. Note that when you use either a wildcard directory or a list of path names, if files in different directories have the same name, only the first file found in the search path is used. When either a specific directory or a wildcard directory is used, the relative file specification on the file statement in the PDF is not used to locate the file. However, when a root directory is used, the utility appends the relative file specification from the file statement in the PDF to the root directory in the material search path to locate files. This is a required qualifier for the PRODUCT PACKAGE command. Parentheses (()) are optional only when you specify a single path name. They are required when you specify multiple path names. /OWNER_UIC /OWNER_UIC=uic Specifies the owner user identification code (UIC) for files created during a copy operation. By default, the user executing the operation owns the software product files. For example, if you are logged in to your own account, you can use this qualifier during a copy operation to assign ownership of the product files to SYSTEM rather than to your own account. Specify the UIC in alphanumeric format (in the form [name]) or in octal group-member format (in the form [g,m]). UIC formats are described in the OpenVMS User's Manual. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /SOURCE /SOURCE=file-specification Specifies the location of the input PDF. If the device name is omitted, it defaults to the user's default device. If the directory name is omitted, it defaults to the user's default directory. If the file name and file type components of the file specification are not provided, they default to product- name.PCSI$DESCRIPTION. The optional PTF, if used, must be in the same directory and have the same file name as the PDF with a .PCSI$TEXT file type. If a file named product-name.PCSI$TEXT is not found, the package operation does not use a PTF. This is a required qualifier for the PRODUCT PACKAGE command. The logical name PCSI$SOURCE is not used. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. 3 Example $ PRODUCT PACKAGE VIEWER - _$ /PRODUCER=ABC /FORMAT=SEQUENTIAL/ LOG - _$ /SOURCE=[JAMES.TEST.PDF] - _$ /DESTINATION=DKA200:[PCSI_KITS] - _$ /MATERIAL=BUILD$:[VIEWER0201.RESULT...] The command in this example creates a sequential kit for product VIEWER named DKA200:[PCSI_KITS]ABC-VAXVMS-VIEWER-0201- 1.PCSI. The input PDF named [JAMES.TEST.PDF]ABC-VAXVMS-VIEWER- 0201-1.PCSI$DESCRIPTION in the user's default directory and product material files from the BUILD$:[VIEWER0201.RESULT...] directory tree are used to create the kit. 2 RECONFIGURE Modifies the active configuration choices for an installed product based on the installation options from the product kit and the responses from the user. Format PRODUCT RECONFIGURE product-name[,...] [/qualifiers] 3 Parameter product-name Names the product, or list of products, to reconfigure. 3 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /CONFIGURATION /CONFIGURATION=(keyword[,...]) Specifies how the configuration choices will be supplied. Keywords are: CURRENT This is the default. It uses values from the product database, which has the current values recorded from the last time the product was installed or reconfigured. PRODUCER Uses values specified by the software manufacturer for this version of the product. INPUT=pcf- Uses values from the specified product name configuration file. OUTPUT=pcf- Writes configuration choices to the specified name product configuration file. If no file name is supplied, creates a file named DEFAULT.PCSI$CONFIGURATION. The keywords CURRENT, PRODUCER, and INPUT are mutually exclusive. Each of these, however, can be used with the keyword OUTPUT. If you specify only one keyword, you can omit the parentheses. /HELP /HELP /NOHELP (default) Controls whether detailed explanations of product options and informational text are displayed. The first time you install a product, these explanations can help you decide which options to select. When you perform subsequent installations or upgrades, you might choose the brief explanations to save time. When /NOHELP is selected, you can request a detailed explanation about a question by performing one of the following actions at the prompt: o Press the Help key or PF2 key o Type ? and press the Return key /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /REMARK /REMARK=string Records a comment in the product database about the task you are performing. The SHOW HISTORY command displays the recorded comments. For each product, the POLYCENTER Software Installation utility stores a chronological list of tasks you perform and the associated remarks. The default behavior is that no remark is recorded. /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location defined by the logical name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /TRACE /TRACE /NOTRACE (default) Displays all DCL commands that the POLYCENTER Software Installation utility may execute while performing the operation. Any output generated by these commands is also displayed. This qualifier is a debugging aid to trace the execution of DCL commands and command procedures executed in a subprocess. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. /WORK /WORK=device:[directory] Specifies the name of the device and directory acting as a temporary work area. By default, temporary files are created in subdirectories of the user's login directory. 3 Example $ DEFINE PCSI$SOURCE DKA500:[DWMOTIF.KIT] $ PRODUCT RECONFIGURE DWMOTIF/VERSION=V1.2-3 The command in this example enters into a dialog with the user to change the configuration options for the product DECwindows Motif Version 1.2-3. 2 REGISTER 3 PRODUCT Registers, in the database, one or more products that have been installed on the system by a mechanism other than the POLYCENTER Software Installation utility. Format PRODUCT REGISTER PRODUCT product-name[,...] [/qualifiers] 4 Parameter product-name Names the product, or list of products, to register. 4 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /DESTINATION /DESTINATION=device-name:[directory-name] Specifies the location where the installed product resides. If you omit the device name, the utility uses your current default device. If you omit the directory name, the utility uses the [VMS$COMMON] directory as the default directory. If you do not use this qualifier to specify a destination, the utility uses the location defined by logical name PCSI$DESTINATION. If this logical name is not defined, the utility uses the location SYS$SYSDEVICE:[VMS$COMMON], the top- level directory. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /REMARK /REMARK=string Records a comment in the product database about the task you are performing. The SHOW HISTORY command displays the recorded comments. For each product, the POLYCENTER Software Installation utility stores a chronological list of tasks you perform and the associated remarks. The default behavior is that no remark is recorded. /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. These logical names do not affect the /DESTINATION qualifier. /SOURCE /SOURCE=device-name:[directory-name] Specifies the disk and directory where the utility searches for the software product kit or kits. If /SOURCE is not specified, the utility searches in the location defined by the logical name PCSI$SOURCE. If PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified, the POLYCENTER Software Installation utility searches the current default directory. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. 4 Example $ PRODUCT REGISTER PRODUCT TOOLCHEST/SOURCE=DKB500:[TOOLCHEST.KIT] The command in this example registers the product TOOLCHEST that was not installed by the POLYCENTER Software Installation utility, for example, it was installed by the VMSINSTAL utility. 3 VOLUME For a volume containing installed products, records a change in volume label in the product database. This command also records a change in the physical or logical device name. Format PRODUCT REGISTER VOLUME old-volume-label device-name [/qualifiers] 4 Parameter old-volume-label Names the old (existing) volume label. device-name Names the device for which the volume label is to be changed in the product database. 4 Qualifiers /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. 4 Example $ PRODUCT REGISTER VOLUME AXPVMSV62 DKA0: The command in this example replaces all occurrences of the old volume label in the POLYCENTER Software Installation utility database with the current volume label of the specified disk. 2 REMOVE Removes the specified software product or products from your system and the product database. Format PRODUCT REMOVE product-name[,...] [/qualifiers] 3 Parameter product-name Names the installed product, or list of products, to remove. 3 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /PRODUCER /PRODUCER=producer-name Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. /REMARK /REMARK=string Records a comment in the product database about the task you are performing. The SHOW HISTORY command displays the recorded comments. For each product, the POLYCENTER Software Installation utility stores a chronological list of tasks you perform and the associated remarks. The default behavior is that no remark is recorded. /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. /TRACE /TRACE /NOTRACE (default) Displays all DCL commands that the POLYCENTER Software Installation utility may execute while performing the operation. Any output generated by these commands is also displayed. This qualifier is a debugging aid to trace the execution of DCL commands and command procedures executed in a subprocess. /VERSION /VERSION=version-number Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. /WORK /WORK=device:[directory] Specifies the name of the device and directory acting as a temporary work area. By default, temporary files are created in subdirectories of the the user's login directory. 3 Example $ PRODUCT REMOVE FTAM The command in this example removes the product named FTAM from the system and the product database. 2 SHOW 3 HISTORY Displays a chronological log of operations performed on the specified products. Format PRODUCT SHOW HISTORY product-name[,...] [/qualifiers] 4 Parameter product-name Names the product, or list of products, about which to show information. This is an optional parameter. If you omit it, all products will be shown. 4 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name /BASE_SYSTEM=(base-system-name[,...]) Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. Parentheses (()) are optional only when you specify a single base system name. They are required when you specify multiple base system names. /BEFORE /BEFORE=time Selects entries that were created before the specified date and time. You can specify time as an absolute time, as a combination of absolute and delta times, or as one of the following keywords: TODAY (default) TOMORROW YESTERDAY See the OpenVMS User's Manual for information on specifying time values. /FULL /FULL /NOFULL (default) Controls how the available information is displayed. The /FULL qualifier displays all of the information in 132-column format. The /NOFULL qualifer displays a condensed version of the information. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /OPERATION /OPERATION=keyword /OPERATION=(keyword[,...]) Specifies one or more of the following operations as the value for keyword: INSTALL RECONFIGURE REGISTER_PRODUCT REGISTER_VOLUME REMOVE Parentheses (()) are optional only when you specify a single keyword. They are required when you specify multiple keywords. /PRODUCER /PRODUCER=producer-name /PRODUCER=(producer-name[,...]) Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. Parentheses (()) are optional only when you specify a single producer name. They are required when you specify multiple producer names. /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. These logical names do not affect the /DESTINATION. /SINCE /SINCE=time Selects records that were created after the specified date and time. You can specify time as an absolute time, as a combination of absolute and delta times, or as one of the following keywords: TODAY (default) YESTERDAY See the OpenVMS User's Manual for information on specifying time values. /USER /USER=username /USER=(username[,...]) Displays information about the products installed, configured, or removed by the specified user. Parentheses (()) are optional only when you specify a single user name. They are required when you specify multiple user names. /VERSION /VERSION=version-number /VERSION=(version-number[,...]) Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. Parentheses (()) are optional only when you specify one version number. They are required when you specify more than one version number. 4 Example $ PRODUCT SHOW HISTORY */OPERATION=INSTALL/BEFORE=22-MAY-1996 The command in this example lists all the products that were installed before May 22, 1996. 3 OBJECT Displays information about objects created during a software product installation. Examples of software objects are files and directories. Format PRODUCT SHOW OBJECT object-name [/qualifiers] 4 Parameter object-name Names the object, or list of objects, about which to show information. This is an optional parameter. If you omit it, all objects will be shown. 4 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name /BASE_SYSTEM=(base-system-name[,...]) Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. Parentheses (()) are optional only when you specify a single base system name. They are required when you specify multiple base system names. /FULL /FULL /NOFULL (default) Controls how the available information is displayed. The /FULL qualifier displays all of the information in 132-column format. The /NOFULL qualifer displays a condensed version of the information. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /PRODUCER /PRODUCER=producer-name /PRODUCER=(producer-name[,...]) Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. Parentheses (()) are optional only when you specify a single producer name. They are required when you specify multiple producer names. /PRODUCT /PRODUCT=product-name /PRODUCT=(product-name[,...]) Performs the operation only on the specified product name. Parentheses (()) are optional only when you specify a single product name. They are required when you specify multiple product names. /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. These logical names do not affect the /DESTINATION. /VERSION /VERSION=version-number /VERSION=(version-number[,...]) Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. Parentheses (()) are optional only when you specify one version number. They are required when you specify more than one version number. 4 Example $ PRODUCT SHOW OBJECT */PRODUCT=ABC/FULL The command in this example lists all objects such as files, directories, library modules, and other objects that were created when the product ABC was installed. 3 PRODUCT Displays a list of software products installed on your system. Use the /FULL qualifier to display additional information such as kit type, maintenance activity, and software dependencies. Format PRODUCT SHOW PRODUCT product-name[,...] [/qualifiers] 4 Parameter product-name Names the product, or list of products, about which to show information. This is an optional parameter. If you omit it, all products will be shown. 4 Qualifiers /BASE_SYSTEM /BASE_SYSTEM=base-system-name /BASE_SYSTEM=(base-system-name[,...]) Performs the operation only on software products that apply to the named base system. The name AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX. By default, the operation is performed for products with any base system designation. Parentheses (()) are optional only when you specify a single base system name. They are required when you specify multiple base system names. /FULL /FULL /NOFULL (default) Controls how the available information is displayed. The /FULL qualifier displays all of the information in 132-column format. The /NOFULL qualifer displays a condensed version of the information. /LOG /LOG /NOLOG (default) Displays messages as the POLYCENTER Software Installation utility performs the operation. /MAINTENANCE /MAINTENANCE=product-name /MAINTENANCE=(product-name[,...]) Displays the products to which the named maintenance products have been applied. A maintenance product is either a patch kit or a mandatory update kit. Parentheses (()) are optional only when you specify a single product name. They are required when you specify multiple product names. To list all maintenance products that have been applied to a particular product, use the following command: PRODUCT SHOW PRODUCT product-name /FULL /PRODUCER /PRODUCER=producer-name /PRODUCER=(producer-name[,...]) Performs the operation only on the software products of specified producers. By default, the operation is performed for all producers. Parentheses (()) are optional only when you specify a single producer name. They are required when you specify multiple producer names. /REFERENCED_BY /REFERENCED_BY=product-name /REFERENCED_BY=(product-name[,...]) Displays products that are referenced by the named product. Use this qualifier to show if the product, specified in the /REFERENCED_BY qualifier, has a software dependency on the product or products specified in the product-name parameter of the SHOW PRODUCT command. If you specify an asterisk (*) as the product name, all referenced products are listed for the product named in the /REFERENCED_BY qualifier. Parentheses (()) are optional only when you specify a single product name. They are required when you specify multiple product names. To list all products that require a specified product to be installed, use the command: PRODUCT SHOW PRODUCT product-name /FULL /REFERENCED_BY=* To list all products that are referenced by (that is, required by) a particular product, use the command: PRODUCT SHOW PRODUCT * /REFERENCED_BY=product-name To list all products that are referenced by (that is, required by) other products, use the command: PRODUCT SHOW PRODUCT * /REFERENCED_BY=* /REMOTE /REMOTE /NOREMOTE (default) Uses the product database on a system other than the currently running system. This qualifier is primarily for use in command procedures that Digital supplies. Incorrect use of this qualifier can corrupt the POLYCENTER Software Installation utility database, corrupt installed products, or cause other problems. In some cases, /REMOTE can be useful with the CONFIGURE and SHOW commands. When you use /REMOTE, the following logical names must be defined: o PCSI$SYSDEVICE must specify the physical disk name of the target system disk. This disk must be mounted and allocated to the process executing the PRODUCT command. o PCSI$SPECIFIC must point to a system root on PCSI$SYSDEVICE. It must be defined in the following form, where x is a valid system root: PCSI$SYSDEVICE:[SYSx.] Note that the definition of PCSI$SYSDEVICE and PCSI$SPECIFIC specify only where the utility will find or place its database. /VERSION /VERSION=version-number /VERSION=(version-number[,...]) Performs the operation only on software products that have the specified version. By default, the operation is performed for all versions. Parentheses (()) are optional only when you specify one version number. They are required when you specify more than one version number. 4 Example $ PRODUCT SHOW PRODUCT */REFERENCED_BY=DECNET_OSI The command in this example lists all products on which the DECnet-Plus product is dependent. 3 UTILITY Displays the version of the POLYCENTER Software Installation utility that you are using. Format PRODUCT SHOW UTILITY 4 Parameters None. 4 Qualifiers None. 4 Example $ PRODUCT SHOW UTILITY POLYCENTER Software Installation utility version: V7.1 The command in this example shows the version of the utility that is executing the command.
Software development, photography, jokes, ....
Hosting Favorites |
| ANU Internet Services |
| Netim |
| GoDaddy |
| XEL Media |
Blogroll |
| Bomenstichting |
| Google Translate |
| PHP |
| MySQL |
| jQuery |
| jQuery UI |
| YourHead Stacks API |
| Favicon Generator. |
| Password Generator. |
| Check HTTPS problems |
Tweets by MrMacvos
Marc's Place
On this website, Google Analytics is used to track visitor statistics. These are anonymised data about the number of visitors, which pages they visit on this site, from which regions they visit, which web browsers they use, etc.. You will also see non-personalised ads via Google AdSense. Cookies from Paddle or Paypal are placed when you click on a 'Buy now!' or 'Donate!' button, and possible cookies from Disqus when you use that system to comment on one or more blogposts.
Privacy Statement